|
|
|
|
|
|
Polaris Ranger Standard Cab, 6x6 & Crew Cab Rear View Mirror .
|
List Price: $26.95
Our Price: $24.25
You save $2.70!
|
|
|
This mirror can be installed any glass windshield. It is a Day/Night Mirror, with mounting tab and adhesive included in the kit. This mirror is double jointed. When properly applied to a Tip-Out Windshield it can be used with the windshield open.
(Can be used on any glass windshield)
RangerWare part # WPS-108
|
|
|
|
|
|
|
|
|
|
UTV Trailer Hitch - All Years
|
List Price: $39.95
Our Price: $36.95
You save $3.00!
|
|
|
This UTV trailer hitch is an extra long 17 inches. Big hole is for trailer ball. Small hole is for a wagon pin.
|
|
|
|
|
|
|
|
|
|
2010 Polaris Ranger 400 Front Winch Mount
|
List Price: $62.95
Our Price: $52.95
You save $10.00!
|
|
|
Mounts behind stock front bumper. Made from .188 inch thick steel. Powdercoated for superior protection. It has a two hole pattern to fit most brands of winches.
3" x 4.88" and 6.625" x 3" bolt pattern for most winches.
Mounts behind stock front bumper.
|
|
|
|
|
|
|
|
|
|
Universal UTV Quick Draw Gun Rack
|
List Price: $114.95
Our Price: $99.95
You save $15.00!
|
|
|
Here's a universal mounting, two-gun rack that puts "Ole Betsy" at your fingertips as you cruise your hunting property. Mounts in a "stand alone" fashion and can be positioned for quick access and maximum use of passenger space.
The Quick-Draw holds two guns (shotgun, rifle or muzzleloader) securely and protected in a soft, cushioned cradle.
Unlike conventional clips and loops, our unique Velcro straps form and fit the holding cradles to the exact size of the stock or forearm of the gun it is holding - no more loose fits to disturb the sight and scope settings!
The Quick-Draw comes complete with all necessary hardware for quick and easy installation.
|
|
|
|
|
|
|
|
|
|
2010-2011 Polaris Ranger 400/500 Front 2 in Receiver Mount
|
List Price: $133.49
Our Price: $119.95
You save $13.54!
|
|
|
The Polaris Ranger 400/500/EV Front Receiver Hitch by Extreme Metal Products attaches onto the factory bumper. This unit is allows you to accept a 2.0 inch receiver hitch on the front of your vehicle. If you are planning on using your UTV for heavy duty hauling, towing, planting, or food plot farming, this the perfect UTV accessory for you. They are made from 0.187 inch black powder coated steel and accepts a standard 2 inch receiver hitch.
Fits the Following Models:
Polaris Ranger 400 (2010)
Polaris Ranger 500 (2011)
Polaris Ranger EV (2011)
|
|
|
|
|
|
|
|
|
|
2010 Polaris Ranger 400 Full Belly Skid Plate
|
List Price: $169.95
Our Price: $156.95
You save $13.00!
|
|
|
This aluminum skid plate is constructed of 3/16 inch thick 5052 aircraft grade aluminum. It replaces the stock ABS plastic skid plate.
|
|
|
|
|
|
|
|
|
|
2010-2011 Polaris Ranger 400 / 500 / EV CV Boot Guards .
|
List Price: $188.99
Our Price: $167.95
You save $21.04!
|
|
|
These CV Boot Guards by Extreme Metal Products are laser cut and CNC formed from 0.187 inch thick 5052 aircraft grade aluminum ensuring a perfect fit. Simply bolt them on to your front A-arms and protect your vehicle from rocks, sticks and other debris.
Fits 2010 400, EV and 2011 500 and EV
|
|
|
|
|
|
|
|
|
|
Universal UTV Roof Rack
|
List Price: $181.99
Our Price: $174.95
You save $7.04!
|
|
|
Utility vehicles didn't get their name by accident, they are designed to work -- and one of their most important jobs is to haul cargo. There are times though when bulky, hard-to-handle loads such as bags of duck decoys, deer decoys, tree stands, camping gear, etc. can be a challenge. The Roof Rack is the perfect means for transporting light but awkward materials -- leaving space in the vehicle for passengers and heavier, more manageable loads.
The Roof Rack is constructed of aircraft aluminum, weighs only 14 lbs and provides a generous 22 in x 50 in x 7 in cradle with multiple tie-down points. It installs directly to the top of any full-sized UTV quickly and easily. The Roof Rack comes with a tough coat of baked-on, black enamel that adds a touch of class to any rugged vehicle. Load limit, 100 lbs. The Roof Rack is UPS shippable. MADE WITH PRIDE IN THE USA!
|
|
|
|
|
|
|
|
|
|
2010 Polaris Ranger 400 - EV Rear Bumper
|
List Price: $209.95
Our Price: $189.95
You save $20.00!
|
|
|
Bumper made from 11 ga Steel, the mounting brackets made from .188 thick steel. The ends are welded and ground smooth with all mounting hardware and instructions. included. This Ranger bumper mounts to the same location as factory bumpers.
Laser Cut and formed from one piece of steel this bumper is very strong and will dress up the rear of your Ranger. The finished bumper is powder coated with a mini-texture black. The mounting brackets are made from heavy gauge steel.
|
|
|
|
|
|
|
|
|
|
Polaris Ranger 400 Utility Rack
|
List Price: $203.99
Our Price: $189.95
You save $14.04!
|
|
|
Great Day’s UTV Utility Rack adds an extra dimension of usefulness to a side-by-side, off-road vehicle. The Utility Rack mounts to the UTV bed and provides an extension of the UTV’s cab frame—providing the perfect place to transport bulky, but light-weight equipment or materials. The Utility Rack is ideal for hauling canoes, kayaks, ladders or miscellaneous materials.
The Utility Rack is constructed of 1 1/2 inch aircraft aluminum and weighs only lbs. It can be assembled in just minutes with regular hand tools and installs easily to the bed rails of the UTV. Comes complete with two guide-rail posts with eye-bolt tie-downs mounted at the top of the rear frame and also includes two cinching straps. The Utility Rack is rated for loads weighing up to 100 lbs.
The Utility Rack is not attached to the frame of the UTV cab; therefore, the bed tilt mechanism is functional when there is no load on the Utility Rack.
Fits all years of the Polaris Ranger 400
|
|
|
|
|
|
|
|
|
|
Polaris Ranger Utility Rack
|
List Price: $234.99
Our Price: $224.95
You save $10.04!
|
|
|
Great Day’s UTV Utility Rack adds an extra dimension of usefulness to a side-by-side, off-road vehicle. The Utility Rack mounts to the UTV bed and provides an extension of the UTV’s cab frame—providing the perfect place to transport bulky, but light-weight equipment or materials. The Utility Rack is ideal for hauling canoes, kayaks, ladders or miscellaneous materials.
The Utility Rack is constructed of 1 1/2 inch aircraft aluminum and weighs only lbs. It can be assembled in just minutes with regular hand tools and installs easily to the bed rails of the UTV. Comes complete with two guide-rail posts with eye-bolt tie-downs mounted at the top of the rear frame and also includes two cinching straps. The Utility Rack is rated for loads weighing up to 100 lbs.
The Utility Rack is not attached to the frame of the UTV cab; therefore, the bed tilt mechanism is functional when there is no load on the Utility Rack.
Fits all Ranger models 2000-2010 except for the RZR
|
|
|
|
|
|
|
|
|
|
2003 - 2011 Polaris Ranger Standard Cab & 2003 - 2011 6x6 & Crew Cab Sun Roof .
|
List Price: $289.95
Our Price: $260.95
You save $29.00!
|
|
|
The Sun Roof can be installed on any RangerWare Weather Protection System. The Sun Roof offers additional ventilation and also creates an open feeling within the passenger area.
Specifically made for the RangerWare roof but can be made to fit most roofs.
RangerWare part # WPS-786
|
|
|
|
|
|
|
|
|
|
2010-2011 Polaris Ranger 400/500 Front Bumper with Winch Mount
|
List Price: $364.99
Our Price: $319.95
You save $45.04!
|
|
|
The Polaris Ranger 400/500 Front Bumper with Winch Mount by Extreme Metal Products was designed to replace your stock bumper. It requires no drilling or cutting to mount, and even fits most winches up to 3,500 lbs. It is manufactured from 1/8 inch thick and 3/16 inch thick American steel then powder coated black for superior protection. Also includes a 1 1/2 inch stinger. Bolt pattern for the winch mount is 3 in x 4.875 in. As this bumper is custom designed, it fits perfectly and mounts in just minutes to the factory location. Comes with instructions and all mounting hardware needed.
*Does not include winch
|
|
|
|
|
|
|
|
|
|
2003 - 2011 Ranger Standard Cab, 6x6 & Crew Cab Polaris Ranger Turn Signal Kit .
|
List Price: $408.95
Our Price: $368.05
You save $40.90!
|
|
|
This is a universal Combination Turn Signal/Horn Kit This kit can be used on just about anything 12 volt that you may want signals on.
It features Amber 4 element LED's Switch, Horn, universal mounting brackets and Wire harness that is as close to plug and play as you can get.
You won't be disappointed.
Part # WOC-1100
|
|
|
|
|
|
|
|
|
|
Extreme Metal Products Universal Heavy Duty Plow
|
List Price: $1,149.99
Our Price: $949.95
You save $200.04!
|
|
|
This is not your average Chinese made ATV plow. It is made in Cleveland, Ohio from American A36 Steel, not soft Chinese steel like others on the market. Many features on this plow are a first in the UTV market. Laser cut and CNC formed, it is then powder coated for superior protection. It also features a pivot in the middle for uneven ground which helps to level the blade so you do not wear out one end of your cutting edge. The frame is made from 1/4 inch thick A36 steel. The plow comes powder coated black, not the yellow shown in the pictures. With the optional power angle you can also easily change the angle in which the plow meets the ground. The whole plow raises and lowers with a winch (not included). The 2 inch mounting system allows for easy removal without needing any tools.
Note: Does not come with vehicle specific mount, must be purchased separately.
|
|
|
|
