|
|
|
|
|
|
Polaris Ranger Standard Cab, 6x6 & Crew Cab Rear View Mirror .
|
List Price: $26.95
Our Price: $24.25
You save $2.70!
|
|
|
This mirror can be installed any glass windshield. It is a Day/Night Mirror, with mounting tab and adhesive included in the kit. This mirror is double jointed. When properly applied to a Tip-Out Windshield it can be used with the windshield open.
(Can be used on any glass windshield)
RangerWare part # WPS-108
|
|
|
|
|
|
|
|
|
|
2010 Ranger 400, EV and 2011 Ranger 500, 500 Crew and EV Half Windshield
|
List Price: $159.95
Our Price: $144.95
You save $15.00!
|
|
|
CAUTION WHEN ORDERING: FITS 2010 Ranger 400, EV and 2011 Ranger 500, 500 Crew and EV ONLY!
Made from 1/4 inch thick scratch resistant polycarbonate. Attaches with Quick Connect Clamps. You can easily remove by simply removing the thumbscrews.
1/4 inch thick polycarbonate.
Mounts with (4) Quick Connect Clamps.
Includes: all mounting hardware.
Made in the USA.
|
|
|
|
|
|
|
|
|
|
2003 - 2011 Polaris Ranger Standard Cab & 2003 - 2011 6x6 & Crew Cab Sun Roof .
|
List Price: $289.95
Our Price: $260.95
You save $29.00!
|
|
|
The Sun Roof can be installed on any RangerWare Weather Protection System. The Sun Roof offers additional ventilation and also creates an open feeling within the passenger area.
Specifically made for the RangerWare roof but can be made to fit most roofs.
RangerWare part # WPS-786
|
|
|
|
|
|
|
|
|
|
2010 Polaris Ranger 400 - EV Plexiglass Front Windshield
|
List Price: $289.95
Our Price: $263.95
You save $26.00!
|
|
|
Made from 1/4 inch thick scratch resistant polycarbonate and 14 ga. Steel. Attaches with quick connect clamps. You can easily remove by simply removing the thumbscrews. Includes all mounting hardware.
|
|
|
|
|
|
|
|
|
|
2010 - 2011 Polaris Ranger 400-EV 2011 500 Windshield
|
List Price: $489.95
Our Price: $431.95
You save $58.00!
|
|
|
This windshield removes in seconds for increased airflow thru the cab or trailering. It goes back on just as easily. The windshield is made of rugged 1/4″ scratch resistant acrylite glass. It won’t rattle or bow. The frame is constructed of sturdy Aluminum Diamondplate Panel using all stainless steel hardware and self locking nuts. The Aluminum is then sandblasted and then Powdercoated Matte Black, Matte Dark Green, Gloss Black or Bright Silver.
The lower aluminum panel is ready to accept the FTDCabs front rack and is cut to follow the Rangers hood contour. Both the top and bottom of windshield has an aluminum stiffener built in to prevent it from bowing.
This Polaris Ranger windshield can be removed in seconds without the need for any tools or loosening any other items.
|
|
|
|
