|
|
|
|
|
|
Roll Tube Mount UTV Light Bracket Set
|
List Price: $43.95
Our Price: $37.95
You save $6.00!
|
|
|
These brackets are great for mounting additional lights to your UTV by simply clamping to the side of your roll cage. They were designed with the woods rider in mind. In other words, you can mount light to your roll cage down low so that tree branches will not knock your lights off. Will fit Yamaha Rhino, RZR, Polaris Ranger and Mule.
They will fit almost all UTV's but you must specify what size diameter roll cage you have.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Ranger Standard Cab & 2009 Crew Cab &6x6 Polaris Ranger Wye Vent Kit .
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
This is the WOC-1104 Wye Vent Kit. It can be used with any application using 2" heater ducting. It comes with a "Wye" 2 360 degree swivel vents, duct hose and ties. Often used for additional defrost venting.
Part # WOC-1104
|
|
|
|
|
|
|
|
|
|
2003-2009 Polaris Ranger Yamaha Rhino Blower Motor .
|
List Price: $96.95
Our Price: $87.25
You save $9.70!
|
|
|
Replacement Blower motor to fit all RangerWare and Rhinogear heater systems Part number is WOC-104 Blower Motor
|
|
|
|
|
|
|
|
|
|
Off Road Front Light Kit
|
List Price: $136.95
Our Price: $123.26
You save $13.69!
|
|
|
This light kit includes two 12 volt 35 watt replaceable lights with mounting brackets and custom designed wiring harness. These lights are very bright for 35 watts due to the lens design. The lights feature a very tough Cast steel housing. The kit comes complete with switch.
This light kit is very universal and could be easily adapted to nearly any vehicle.
|
|
|
|
|
|
|
|
|
|
Side By Side Roof Mount Light Kit
|
List Price: $199.95
Our Price: $179.95
You save $20.00!
|
|
|
There are three 12 volt lights total, two 55W halogen sealed beam lights for the front and one for the rear. The bulbs are replaceable and are mounted in a glass reflector that has a steel backing plate. These flood lights mount on the top or bottom of just about any roof and can be adjusted a few degrees either up or down. They will fit on other brands of roofs provided the mounting surface is correct. The floodlight mounting hardware is supplied and the lights have wire pigtails but you must supply the wire and switch to the power source.
(switch and wiring are not included)
|
|
|
|
|
|
|
|
|
|
Polaris Ranger Roof Mount Radio Box All Years, All Models
|
List Price: $259.95
Our Price: $234.85
You save $25.10!
|
|
|
This radio box is constructed of sturdy Aluminum Diamondplate. It's dimensions are W=26.5 x L=9.5 x H=5.0
This box does not include either the radio, speakers or antenna. It does include the cut outs, light, switches and mounting hardware for the box itself.
*** This box does not include either the radio, speakers or antenna. ***
|
|
|
|
|
|
|
|
|
|
2003 - 2011 Ranger Standard Cab, 6x6 & Crew Cab Polaris Ranger Turn Signal Kit .
|
List Price: $408.95
Our Price: $368.05
You save $40.90!
|
|
|
This is a universal Combination Turn Signal/Horn Kit This kit can be used on just about anything 12 volt that you may want signals on.
It features Amber 4 element LED's Switch, Horn, universal mounting brackets and Wire harness that is as close to plug and play as you can get.
You won't be disappointed.
Part # WOC-1100
|
|
|
|
|
|
|
|
|
|
Polaris Ranger Roof Mount Radio All Years, All Models
|
List Price: $504.95
Our Price: $454.45
You save $50.50!
|
|
|
This radio box is constructed of sturdy Aluminum Diamondplate. It's dimensions are W=26.5 x L=9.5 x H=5.0
The Radio/CD Player is a Pioneer DEH-2000MP rated at 22 watts RMS. Complete with remote control, WMA-MP3 compatible with aux. jack with a detachable faceplate. Speakers are 2 Pioneer TS-A1372R 5.1 inch (13cm) Coaxial 3 way rated at 35 watts RMS. The antenna is included and it includes a dome Light at base of box.
The Polaris Ranger Radio box mounts on the underside of any of our Diamondplate roofs. It may fit on other brands of roofs provided the roof has a flat mounting surface and is large enough. The radio system is fully self contained with speakers and antenna. The systems switches are supplied but you supply the wire to the power source.
It is suggested that you drill the holes for the radio and antenna yourself but this can be done by us at no additional charge should you wish. (by default this will not be done)
|
|
|
|
