|
|
|
|
|
|
Polaris Ranger Standard Cab, 6x6 & Crew Cab Rear View Mirror .
|
List Price: $26.95
Our Price: $24.25
You save $2.70!
|
|
|
This mirror can be installed any glass windshield. It is a Day/Night Mirror, with mounting tab and adhesive included in the kit. This mirror is double jointed. When properly applied to a Tip-Out Windshield it can be used with the windshield open.
(Can be used on any glass windshield)
RangerWare part # WPS-108
|
|
|
|
|
|
|
|
|
|
UTV Trailer Hitch - All Years
|
List Price: $39.95
Our Price: $36.95
You save $3.00!
|
|
|
This UTV trailer hitch is an extra long 17 inches. Big hole is for trailer ball. Small hole is for a wagon pin.
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Mud Flaps - Standard Cab and 2010 6x6 & Crew Cab Front Mud Flaps
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
These mudflaps fit the 2009-2010 Standard Cab Rangers and 2010 Crew Cab and 6×6 Rangers only. (they will not fit 2009 Crew Cab or 6×6)
Cuts down noticeably the amount of dust from entering the forward cab area
Constructed of sturdy 1/8″Aluminum Diamondplate
Sandblasted and Powdercoated Matte Black.
Bolts to the Ranger using existing screws, barely effecting the overall width of the machine. No holes to drill and the mudflaps install in minutes. These mudflaps will also help reduce the dust coming inside the cab area.
Will not fit Ranger 400, 2009 Crew or 6X6 or 2011 500 models.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab Mud Flaps .
|
List Price: $57.95
Our Price: $52.15
You save $5.80!
|
|
|
This Mud Flap has a black pebble finish, is 12”x20”x1/8” with heavy steel powder coated attachment brackets. Mud Flap brackets mount to our WPS-102 Rear Bumper attaching brackets. The Mud Flap is designed for use on 2×4, 4×4, and 6×6 machines.
(Requires RangerWare WPS-102 Rear Bumper for mounting)
RangerWare part # WPS-105
|
|
|
|
|
|
|
|
|
|
2005 - 2008 Polaris Ranger Standard Cab & 2005- 2009 6x6 & Crew Cab Under Dash Panels .
|
List Price: $63.95
Our Price: $57.55
You save $6.40!
|
|
|
Friction fit panels install on the under side of dash board to “help” control dust and heat issues.
RangerWare part # WPS-120
|
|
|
|
|
|
|
|
|
|
2010 - 2011 Polaris Ranger Standard Cab & 2010-11 6x6 & Crew Cab Rear Seat Dust Barriers
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
These dust barriers are constructed of 1/8″Aluminum Diamondplate and then sandblasted and Powdercoated Matte Black.
Combined with the FTDcabs front mud guards, the dust inside the cab will be kept to a minimum with these panels. They mount to the rear of the seat using the existing screws and will keep the dust from entering from between the seat base and seat back.
For 800cc Polaris Rangers only
|
|
|
|
|
|
|
|
|
|
2003-2011 Polaris Ranger Standard Cab, 6x6, Crew & Rzr 1" Wheel Spacer .
|
List Price: $99.95
Our Price: $89.95
You save $10.00!
|
|
|
Need to widen out your Ranger or Rzr? Add an extra 2 inches total width to it using a pair of these High quality 1 inch aluminum spacers by HighLifter. 2 per package.
Part # WT4/156-1
|
|
|
|
|
|
|
|
|
|
Universal UTV Quick Draw Overhead Gun Rack
|
List Price: $104.99
Our Price: $93.95
You save $11.04!
|
|
|
Here’s the perfect way to safely keep your firearms at your fingertips – and, to keep them totally protected. The Quick Draw Overhead Gun Rack holds two guns securely in the inside roof area of the UTV. The unique mounting system installs in just minutes without any drilling or bolting. Features super-soft rubber gun clips that provide easy access and secure transport.
This model fits UTV’s which have upper (roof) frames that measure 23 to 28 inches from front to back
Ranger 500
Ranger 800
Kabota RTV 500
Kawasaki Mule 610
Honda Big Red
|
|
|
|
|
|
|
|
|
|
2009 - 2011 Polaris Ranger Standard Cab & 2010-2011 6x6 Aluminum Floorboards .
|
List Price: $109.95
Our Price: $98.95
You save $11.00!
|
|
|
These floorboards will stop your existing stock floor from cracking. It will also help deflect debris from coming from below. These Ranger floorboards do not glue on like many other floorboards. They use the existing screws that are already or your Ranger. Simply unscrew, lay the floorboard down and re-install the floorboards. That's it.
|
|
|
|
|
|
|
|
|
|
Universal UTV Quick Draw Gun Rack
|
List Price: $114.95
Our Price: $99.95
You save $15.00!
|
|
|
Here's a universal mounting, two-gun rack that puts "Ole Betsy" at your fingertips as you cruise your hunting property. Mounts in a "stand alone" fashion and can be positioned for quick access and maximum use of passenger space.
The Quick-Draw holds two guns (shotgun, rifle or muzzleloader) securely and protected in a soft, cushioned cradle.
Unlike conventional clips and loops, our unique Velcro straps form and fit the holding cradles to the exact size of the stock or forearm of the gun it is holding - no more loose fits to disturb the sight and scope settings!
The Quick-Draw comes complete with all necessary hardware for quick and easy installation.
|
|
|
|
|
|
|
|
|
|
2010 2011 Polaris Ranger 2 Inch Lift Kit .
|
List Price: $158.95
Our Price: $145.95
You save $13.00!
|
|
|
These lift kits are made from 3/16 inch laser cut American steel. They are then powder coated black for superior protection. With no special tools required, they are easy to install and can be mounted in less than 30 minutes. Includes a rear sway bar, instructions, and mounting hardware.
Fits 2010-11 Ranger XP800 and Crew
Not recommended for Ranger HD because of rear HD option. The fronts will fit.
|
|
|
|
|
|
|
|
|
|
2005-2008 Polaris Ranger Belly Skid Plate - Standard Cab - Aluminum
|
List Price: $169.99
Our Price: $149.95
You save $20.04!
|
|
|
Protect your Ranger with this heavy duty skid plate. Made from 3/16" thick 5052 Aircraft Grade Aluminum. It replaces the stock plastic skid plate.
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Belly Skid Plate - Standard Cab-Aluminum
|
List Price: $169.95
Our Price: $152.95
You save $17.00!
|
|
|
Protect your Ranger with this heavy duty skid plate. Made from 3/16" thick 5052 Aircraft Grade Aluminum. It replaces the stock plastic skid plate.
|
|
|
|
|
|
|
|
|
|
2009 Polaris Ranger Headache Rack Bulkhead
|
List Price: $179.95
Our Price: $162.95
You save $17.00!
|
|
|
For 2009 Polaris Ranger only. This headache rack protects the driver and passenger from objects in cargo area. Made of 16 ga. steel it is powder coated a texture black finish. This rack will keep things such as logs from falling into the passenger area. Punched holes allow for good visibility when backing up.
|
|
|
|
|
|
|
|
|
|
2010-2011 Polaris Ranger CV Guards and 2010-2011 Crew Cab and 6X6 Boot Guards-Aluminum
|
List Price: $177.95
Our Price: $162.95
You save $15.00!
|
|
|
Protect your A-arms and expensive CV boot with these functional guards. CV boots can easily be ripped from sticks, brush etc. These guards will help protect your drivetrain. Sold in sets of four (front and rear). Made of1/8 inch thick 5052 Aircraft grade aluminum that is CNC Cut.
Includes all hardware and instructions.
Will fit 2010 Ranger 500, 800 and crew (will not fit 6x6).
|
|
|
|
|
|
|
|
|
|
2010-2011 Polaris Ranger CV Guards and 2010-2011 Crew Cab Boot Guards-Steel
|
List Price: $177.95
Our Price: $162.95
You save $15.00!
|
|
|
Protect your A-arms and expensive CV boot with these functional Steel CV guards. CV boots can easily be ripped from sticks, brush etc. These guards will help protect your drivetrain. Sold in sets of four (front and rear). Made of1/8 inch thick steel.
Includes all hardware and instructions.
Will fit 2010-2011 Ranger 500, 800 and Crew Cab (will not fit 6x6).
|
|
|
|
|
|
|
|
|
|
2010 Polaris Ranger Headache Rack Bulkhead
|
List Price: $179.99
Our Price: $162.95
You save $17.04!
|
|
|
For the 2010 Polaris Ranger 500, 700, and crew. This headache rack protects the driver and passenger from objects in cargo area. Made of 16 ga. steel it is powder coated with a texture black finish. This rack will keep things such as logs from falling into the passenger area and still allows the cargo bed to dump when installed. Punched holes allow for good visibility when backing up.
|
|
|
|
|
|
|
|
|
|
2009 Polaris Ranger Black Steel CV Boot Guards .
|
List Price: $174.99
Our Price: $167.95
You save $7.04!
|
|
|
Better protect your CV boots and A-arms with these metal guards. The CV boot guards are CNC cut then powder coated black for added durability. They are easy to install with the included instructions and hardware and require no drilling or cutting.
Fits all 2009 Rangers except for the Ranger Crew Cab and 6x6.
|
|
|
|
|
|
|
|
|
|
2009 Polaris Ranger Aluminum CV Boot Guards .
|
List Price: $174.99
Our Price: $167.95
You save $7.04!
|
|
|
Better protect your CV boots and A-arms with these 1/8 inch thick 5052 aircraft grade aluminum guards. They are easy to install with the included instructions and hardware and require no drilling or cutting.
Fits all 2009 Rangers except for the Ranger Crew Cab
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab Rear Bumper .
|
List Price: $189.95
Our Price: $170.95
You save $19.00!
|
|
|
The WPS-102 RangerWare Rear Bumper consists of two 1¾” steel tubes, with wrap around ends. It is powder coated in crinkle coat black to match your vehicle. It is easy to install, attaching under the dump box. The kit includes all brackets and necessary hardware. For installation on a 6×6, please supply the year of vehicle. There may be restrictions on some models. When ordering, stipulate both the year and the model that the unit will be installed on.
(On 6x6 this bumper will limit box travel by about 2 inches-bumper will hit on back tires.) (This bumper is needed for the WPS-105 Mud Flaps)
RangerWare Part # WPS-102
|
|
|
|
