|
|
|
|
|
|
Polaris Ranger Standard Cab, 6x6 & Crew Cab Rear View Mirror .
|
List Price: $26.95
Our Price: $24.25
You save $2.70!
|
|
|
This mirror can be installed any glass windshield. It is a Day/Night Mirror, with mounting tab and adhesive included in the kit. This mirror is double jointed. When properly applied to a Tip-Out Windshield it can be used with the windshield open.
(Can be used on any glass windshield)
RangerWare part # WPS-108
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab RangerWare Tip Out Limiter .
|
List Price: $29.95
Our Price: $26.95
You save $3.00!
|
|
|
Replacement Tip Out Limiter..This item only works with the latch mechanism shown in the photos
RangerWare Part # WPS-101TL
|
|
|
|
|
|
|
|
|
|
UTV Trailer Hitch - All Years
|
List Price: $39.95
Our Price: $36.95
You save $3.00!
|
|
|
This UTV trailer hitch is an extra long 17 inches. Big hole is for trailer ball. Small hole is for a wagon pin.
|
|
|
|
|
|
|
|
|
|
Roll Tube Mount UTV Light Bracket Set
|
List Price: $43.95
Our Price: $37.95
You save $6.00!
|
|
|
These brackets are great for mounting additional lights to your UTV by simply clamping to the side of your roll cage. They were designed with the woods rider in mind. In other words, you can mount light to your roll cage down low so that tree branches will not knock your lights off. Will fit Yamaha Rhino, RZR, Polaris Ranger and Mule.
They will fit almost all UTV's but you must specify what size diameter roll cage you have.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Ranger Standard Cab & 2009 Crew Cab &6x6 Polaris Ranger Wye Vent Kit .
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
This is the WOC-1104 Wye Vent Kit. It can be used with any application using 2" heater ducting. It comes with a "Wye" 2 360 degree swivel vents, duct hose and ties. Often used for additional defrost venting.
Part # WOC-1104
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Mud Flaps - Standard Cab and 2010 6x6 & Crew Cab Front Mud Flaps
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
These mudflaps fit the 2009-2010 Standard Cab Rangers and 2010 Crew Cab and 6×6 Rangers only. (they will not fit 2009 Crew Cab or 6×6)
Cuts down noticeably the amount of dust from entering the forward cab area
Constructed of sturdy 1/8″Aluminum Diamondplate
Sandblasted and Powdercoated Matte Black.
Bolts to the Ranger using existing screws, barely effecting the overall width of the machine. No holes to drill and the mudflaps install in minutes. These mudflaps will also help reduce the dust coming inside the cab area.
Will not fit Ranger 400, 2009 Crew or 6X6 or 2011 500 models.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab Mud Flaps .
|
List Price: $57.95
Our Price: $52.15
You save $5.80!
|
|
|
This Mud Flap has a black pebble finish, is 12”x20”x1/8” with heavy steel powder coated attachment brackets. Mud Flap brackets mount to our WPS-102 Rear Bumper attaching brackets. The Mud Flap is designed for use on 2×4, 4×4, and 6×6 machines.
(Requires RangerWare WPS-102 Rear Bumper for mounting)
RangerWare part # WPS-105
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Front Winch Mount
|
List Price: $64.99
Our Price: $54.95
You save $10.04!
|
|
|
This American made winch plate fits Warn, Ramsey, Milemarker and other brand winches. It mounts inside the front bumper and is powder coated for superior protection.
Fits:
2009-2011 Ranger 800
2009-2010 Ranger 500 and 700
2010 Crew and 6x6
*Winch not included.
|
|
|
|
|
|
|
|
|
|
2005 - 2008 Polaris Ranger Standard Cab & 2005- 2009 6x6 & Crew Cab Under Dash Panels .
|
List Price: $63.95
Our Price: $57.55
You save $6.40!
|
|
|
Friction fit panels install on the under side of dash board to “help” control dust and heat issues.
RangerWare part # WPS-120
|
|
|
|
|
|
|
|
|
|
2010 - 2011 Polaris Ranger Standard Cab & 2010-11 6x6 & Crew Cab Rear Seat Dust Barriers
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
These dust barriers are constructed of 1/8″Aluminum Diamondplate and then sandblasted and Powdercoated Matte Black.
Combined with the FTDcabs front mud guards, the dust inside the cab will be kept to a minimum with these panels. They mount to the rear of the seat using the existing screws and will keep the dust from entering from between the seat base and seat back.
For 800cc Polaris Rangers only
|
|
|
|
