|
|
|
|
|
|
Polaris Ranger Standard Cab, 6x6 & Crew Cab Rear View Mirror .
|
List Price: $26.95
Our Price: $24.25
You save $2.70!
|
|
|
This mirror can be installed any glass windshield. It is a Day/Night Mirror, with mounting tab and adhesive included in the kit. This mirror is double jointed. When properly applied to a Tip-Out Windshield it can be used with the windshield open.
(Can be used on any glass windshield)
RangerWare part # WPS-108
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab RangerWare Tip Out Limiter .
|
List Price: $29.95
Our Price: $26.95
You save $3.00!
|
|
|
Replacement Tip Out Limiter..This item only works with the latch mechanism shown in the photos
RangerWare Part # WPS-101TL
|
|
|
|
|
|
|
|
|
|
Off Road Front Light Kit
|
List Price: $136.95
Our Price: $123.26
You save $13.69!
|
|
|
This light kit includes two 12 volt 35 watt replaceable lights with mounting brackets and custom designed wiring harness. These lights are very bright for 35 watts due to the lens design. The lights feature a very tough Cast steel housing. The kit comes complete with switch.
This light kit is very universal and could be easily adapted to nearly any vehicle.
|
|
|
|
|
|
|
|
|
|
2003-2008 and 2009 Crew Cab and 6x6 Polaris Ranger Half Windshield .
|
List Price: $159.95
Our Price: $136.95
You save $23.00!
|
|
|
Made from 1/4 inch thick scratch resistant polycarbonate windshield (Lexan) with quick connect clamps. Fits 2003-2008 XP, 4x4, and 2010 Crew Cab Rangers and 6x6.
This is a great alternative to a full windshield. It will deflect wind without blocking your view when you get it muddy.
The clamps allow you to remove your windshield without any tools. Simply remove the four thumbscrews and you are done The clamps remain on your roll cage so that you can easily put your windshield back on.
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Half Windshield
|
List Price: $159.95
Our Price: $142.95
You save $17.00!
|
|
|
Made from 1/4 inch thick scratch resistant polycarbonate windshield (Lexan) with quick connect clamps. Fits 2009-2011 XP, 4x4, and 2010-2011 Crew Cab Rangers and 6x6.
This is a great alternative to a full windshield. It will deflect wind without blocking your view when you get it muddy.
The clamps allow you to remove your windshield without any tools. Simply remove the four thumbscrews and you are done The clamps remain on your roll cage so that you can easily put your windshield back on.
|
|
|
|
|
|
|
|
|
|
2010 Ranger 400, EV and 2011 Ranger 500, 500 Crew and EV Half Windshield
|
List Price: $159.95
Our Price: $144.95
You save $15.00!
|
|
|
CAUTION WHEN ORDERING: FITS 2010 Ranger 400, EV and 2011 Ranger 500, 500 Crew and EV ONLY!
Made from 1/4 inch thick scratch resistant polycarbonate. Attaches with Quick Connect Clamps. You can easily remove by simply removing the thumbscrews.
1/4 inch thick polycarbonate.
Mounts with (4) Quick Connect Clamps.
Includes: all mounting hardware.
Made in the USA.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 & 2009 6x6 Polaris Ranger, RangerWare Single Arm Wiper .
|
List Price: $205.95
Our Price: $185.35
You save $20.60!
|
|
|
RangerWare economy model Single Arm Wiper System is for use on our WPS- 101 Tip-Out Windshield and our WPS-111 Fixed Glass Windshield. It features a slightly longer arm that provides good visibility for the driver’s side of the vehicle and partial on the passenger’s side.
(For use on Series 10-2008 & 2009 6x6)
RangerWare Part # WPS-115
|
|
|
|
|
|
|
|
|
|
2005-2008 Polaris Ranger Full Windshield
|
List Price: $279.99
Our Price: $254.95
You save $25.04!
|
|
|
This windshield is made from 3/16 inch thick scratch resistant polycarbonate (Lexan) with quick connect clamps. The bottom is cut from 16 ga. steel and powder coated for superior protection. It is mounted with gaskets and will not scratch your hood. The hood compartment is also accessible even with it installed. Fits 2005-2008 XP700, 500 4x4, 500 4x2, and Crew Cab 6x6.
|
|
|
|
|
|
|
|
|
|
2009 - 2011 Polaris Ranger Standard Cab & 2010 - 2011 6x6 & Crew Cab Plexiglass Windshield
|
List Price: $284.95
Our Price: $259.95
You save $25.00!
|
|
|
Made from Scratch Resistant Polycarbonate and 11 ga. Powder Coated Steel. Easily remove you windshield without any tools. Simply, remove the Thumbscrews and your windshield can be removed. The bottom is has rubber trim to protect your hood.
We leave the protective coating on the Polycarbonate until you get it. This for two reasons to protect it and ensure you that it is Polycarbonate. The protective coating has the manufacturer's label and description on it, We do not use cheap acrylic like others on the market.
2009 - 2011 Polaris Ranger Standard Cab & 2010-2011 6x6 & Crew Cab Plexiglass Windshield
|
|
|
|
|
|
|
|
|
|
2003 - 2011 Polaris Ranger Standard Cab & 2003 - 2011 6x6 & Crew Cab Sun Roof .
|
List Price: $289.95
Our Price: $260.95
You save $29.00!
|
|
|
The Sun Roof can be installed on any RangerWare Weather Protection System. The Sun Roof offers additional ventilation and also creates an open feeling within the passenger area.
Specifically made for the RangerWare roof but can be made to fit most roofs.
RangerWare part # WPS-786
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab Dual Arm Wiper .
|
List Price: $387.95
Our Price: $349.16
You save $38.79!
|
|
|
This is RangerWare's best system, featuring dual wiping arms driven by a single motor that provides excellent clearing. This system is designed for use with the RangerWare WPS-101 Tip-Out Windshield and our WPS-111 Fixed Glass Windshield. Wiper arms will automatically park towards the passenger’s side of the windshield when turned off.
(For use on Series 10-2008 & 2009 6x6)
RangerWare Part #WPS-116
|
|
|
|
|
|
|
|
|
|
2009 Polaris Ranger Windshield - Standard Cab
|
List Price: $489.95
Our Price: $431.95
You save $58.00!
|
|
|
This windshield removes in seconds for increased airflow thru the cab or trailering. It goes back on just as easily. The windshield is made of rugged 1/4″ scratch resistant acrylite glass. It won’t rattle or bow. The frame is constructed of sturdy Aluminum Diamondplate Panel using all stainless steel hardware and self locking nuts. The Aluminum is then sandblasted and then Powdercoated Matte Black, Matte Dark Green, Gloss Black or Bright Silver.
The lower aluminum panel is ready to accept the FTDCabs front rack and is cut to follow the Rangers hood contour. Both the top and bottom of windshield has an aluminum stiffener built in to prevent it from bowing.
This Polaris Ranger windshield can be removed in seconds without the need for any tools or loosening any other items.
|
|
|
|
|
|
|
|
|
|
2010 - 2011 Polaris Ranger Standard Cab & 2010-2011 6x6 & Crew Cab Plexiglass Windshield .
|
List Price: $489.95
Our Price: $431.95
You save $58.00!
|
|
|
This windshield removes in seconds for increased airflow thru the cab or trailering. It goes back on just as easily. The windshield is made of rugged 1/4″ scratch resistant acrylite glass. It won’t rattle or bow. The frame is constructed of sturdy Aluminum Diamondplate Panel using all stainless steel hardware and self locking nuts. The Aluminum is then sandblasted and then Powdercoated Matte Black, Matte Dark Green, Gloss Black or Bright Silver.
The lower aluminum panel is ready to accept the FTDCabs front rack and is cut to follow the Rangers hood contour. Both the top and bottom of windshield has an aluminum stiffener built in to prevent it from bowing.
This Polaris Ranger windshield can be removed in seconds without the need for any tools or loosening any other items.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 Aluminum Roof .
|
List Price: $499.95
Our Price: $440.95
You save $59.00!
|
|
|
Constructed of sturdy 1/8 Aluminum this roof is tough. The roof is sandblasted and then powdercoated Matte Black, Matte Dark Green, Gloss Black or Bright Silver. Available for all standard models of the Polaris Ranger except TM and Series 99.
These diamondplate aluminum roofs have built in front, side and rear rain lip. The 1/8″ thick aluminum means it’s strong enough to use as storage when using our roof rack and you will never have to worry about any rust.
There is no need to remove the Ranger roof for trailering but should you wish, it removes in minutes. The 2008 model roof uses a simple J bolt mount.
Freight will apply.
|
|
|
|
|
|
|
|
|
|
Polaris Ranger Front Cargo Rack 2003 - 2008 Standard Cab & 2003 - 2009 6x6 & Crew Cab .
|
List Price: $489.95
Our Price: $440.95
You save $49.00!
|
|
|
Platform constructed of sturdy 1/8″Aluminum Diamondplate. Arms are made of 1/4″ aluminum barstock. Sandblasted and Powdercoated. Rack may be made to fit most all windshields but is a perfect fit for any FTDcabs front windshield.
The rear mounting brackets bolt to the roll cage. The front mounts to the top of the front bumper. The racks platform tilts up in seconds for easy access under the hood or for cleaning. No tools are required for this and you wont have to worry about losing any expensive thumb screws. The top of the rack is strong enough to support almost anything you can put on it and the side rails have securing holes to tie down or bungee your load. The racks platform is slotted for rigidity and drainage.
(Please state whether you are using the stock front bumper or have a brush guard installed for proper front support bracket height.)
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Front Rack 2003-2011 Standard Cab & 2010 6x6 & Crew Cab Front Cargo Rack
|
List Price: $489.95
Our Price: $440.95
You save $49.00!
|
|
|
Platform constructed of sturdy 1/8″Aluminum Diamondplate. Arms are made of 1/4″ aluminum barstock. Sandblasted and Powdercoated. Rack may be made to fit most all windshields but is a perfect fit for any FTDcabs front windshield.
The rear mounting brackets bolt to the roll cage. The front mounts to the top of the front bumper. The racks platform tilts up in seconds for easy access under the hood or for cleaning. No tools are required for this and you wont have to worry about losing any expensive thumb screws. The top of the rack is strong enough to support almost anything you can put on it and the side rails have securing holes to tie down or bungee your load. The racks platform is slotted for rigidity and drainage.
(Please state whether you are using the stock front bumper or have a brush guard installed for proper front support bracket height.)
Will not fit Ranger 400 or 2011 500 models.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Windshield & 2003 - 2009 6x6 & Crew Cab Windshield .
|
List Price: $499.95
Our Price: $441.95
You save $58.00!
|
|
|
This windshield removes in seconds for increased airflow thru the cab or trailering. It goes back on just as easily. The windshield is made of rugged 1/4″ scratch resistant acrylite glass. It won’t rattle or bow. The frame is constructed of sturdy Aluminum Diamondplate Panel using all stainless steel hardware and self locking nuts. The Aluminum is then sandblasted and then Powdercoated Matte Black, Matte Dark Green, Gloss Black or Bright Silver.
The lower aluminum panel is ready to accept the FTDCabs front rack and is cut to follow the Rangers hood contour. Both the top and bottom of windshield has an aluminum stiffener built in to prevent it from bowing.
This Polaris Ranger windshield can be removed in seconds without the need for any tools or loosening any other items.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 Polaris Ranger Travel Cover .
|
List Price: $513.95
Our Price: $462.55
You save $51.40!
|
|
|
This is a durable cover designed for open trailer towing and/or to provide storage protection for the vehicle. It allows you to locate your vehicle on the trailer facing front or back and leaving it fully equipped with doors and all. The fabric is “Softtouch by Odyssey”. It is waterproof woven polyester, with a polyester felt lining which helps protect the finish of the vehicle. The manufacturer of “Softtouch” warrantees the fabric to be free from defects for a period of five years. All stress points are reinforced to provide longevity of the product. The cover features a snap-in panel in the front located in the winch area for those who use the winch as a method of securing the vehicle to a trailer. It is also vented to keep moisture from collecting under the cover. The bottom of the cover features a ratchet rope to tighten the cover securely around the bottom of the tires completely covering the vehicle. Tie down openings are provided in both the front and the back of cover for securing vehicle to the trailer. Don’t forget to specify if your vehicle is a 4×4 or a 6×6.
This cover will also fit the 2009-2011 Standard Cab Full Size Rangers but will be a little loose at the upper edge of the roll cage in the front.
Color is now Charcoal Black
RangerWare Part # WPS-117
(For use on Series 10-2008 & 2009 6x6) will not fit the 2010-2011 6x6
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab Fixed Glass Windshield .
|
List Price: $521.95
Our Price: $469.76
You save $52.19!
|
|
|
This windshield is built tough. It is powder coated black, heavy gauge steel with laminated Automotive grade safety glass for your protection. It is installed in the same manner as the Tip-Out Windshield, and includes primarily stainless steel mounting hardware. Windshield is pre-drilled to accept the RangerWare Single Arm, or Dual Arm Wiper System.
RangerWare Part # WPS-111
(For use on Series 10-2008 & 2009 6x6)
|
|
|
|
|
|
|
|
|
|
2010-2011 Polaris Ranger Windshield, 2010 6x6 and Crew Cab Windshield - Glass
|
List Price: $685.00
Our Price: $655.95
You save $29.05!
|
|
|
The windshield features laminated safety glass like your car has. This windshield will not scratch. The 16 ga. steel frame is powder coated with a texture black. All the edges are hemmed back on themselves making smooth strong sides. It attached to your ROPS with our quick connect windshield clamps so you can easily remove it. Simply, remove the six thumbscrews. It includes a hand operated windshield wiper.
|
|
|
|
