|
|
|
|
|
|
Polaris Ranger Standard Cab, 6x6 & Crew Cab Rear View Mirror .
|
List Price: $26.95
Our Price: $24.25
You save $2.70!
|
|
|
This mirror can be installed any glass windshield. It is a Day/Night Mirror, with mounting tab and adhesive included in the kit. This mirror is double jointed. When properly applied to a Tip-Out Windshield it can be used with the windshield open.
(Can be used on any glass windshield)
RangerWare part # WPS-108
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab RangerWare Tip Out Limiter .
|
List Price: $29.95
Our Price: $26.95
You save $3.00!
|
|
|
Replacement Tip Out Limiter..This item only works with the latch mechanism shown in the photos
RangerWare Part # WPS-101TL
|
|
|
|
|
|
|
|
|
|
UTV Trailer Hitch - All Years
|
List Price: $39.95
Our Price: $36.95
You save $3.00!
|
|
|
This UTV trailer hitch is an extra long 17 inches. Big hole is for trailer ball. Small hole is for a wagon pin.
|
|
|
|
|
|
|
|
|
|
Roll Tube Mount UTV Light Bracket Set
|
List Price: $43.95
Our Price: $37.95
You save $6.00!
|
|
|
These brackets are great for mounting additional lights to your UTV by simply clamping to the side of your roll cage. They were designed with the woods rider in mind. In other words, you can mount light to your roll cage down low so that tree branches will not knock your lights off. Will fit Yamaha Rhino, RZR, Polaris Ranger and Mule.
They will fit almost all UTV's but you must specify what size diameter roll cage you have.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Ranger Standard Cab & 2009 Crew Cab &6x6 Polaris Ranger Wye Vent Kit .
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
This is the WOC-1104 Wye Vent Kit. It can be used with any application using 2" heater ducting. It comes with a "Wye" 2 360 degree swivel vents, duct hose and ties. Often used for additional defrost venting.
Part # WOC-1104
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Mud Flaps - Standard Cab and 2010 6x6 & Crew Cab Front Mud Flaps
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
These mudflaps fit the 2009-2010 Standard Cab Rangers and 2010 Crew Cab and 6×6 Rangers only. (they will not fit 2009 Crew Cab or 6×6)
Cuts down noticeably the amount of dust from entering the forward cab area
Constructed of sturdy 1/8″Aluminum Diamondplate
Sandblasted and Powdercoated Matte Black.
Bolts to the Ranger using existing screws, barely effecting the overall width of the machine. No holes to drill and the mudflaps install in minutes. These mudflaps will also help reduce the dust coming inside the cab area.
Will not fit Ranger 400, 2009 Crew or 6X6 or 2011 500 models.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab Mud Flaps .
|
List Price: $57.95
Our Price: $52.15
You save $5.80!
|
|
|
This Mud Flap has a black pebble finish, is 12”x20”x1/8” with heavy steel powder coated attachment brackets. Mud Flap brackets mount to our WPS-102 Rear Bumper attaching brackets. The Mud Flap is designed for use on 2×4, 4×4, and 6×6 machines.
(Requires RangerWare WPS-102 Rear Bumper for mounting)
RangerWare part # WPS-105
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Front Winch Mount
|
List Price: $64.99
Our Price: $54.95
You save $10.04!
|
|
|
This American made winch plate fits Warn, Ramsey, Milemarker and other brand winches. It mounts inside the front bumper and is powder coated for superior protection.
Fits:
2009-2011 Ranger 800
2009-2010 Ranger 500 and 700
2010 Crew and 6x6
*Winch not included.
|
|
|
|
|
|
|
|
|
|
2005 - 2008 Polaris Ranger Standard Cab & 2005- 2009 6x6 & Crew Cab Under Dash Panels .
|
List Price: $63.95
Our Price: $57.55
You save $6.40!
|
|
|
Friction fit panels install on the under side of dash board to “help” control dust and heat issues.
RangerWare part # WPS-120
|
|
|
|
|
|
|
|
|
|
2010 - 2011 Polaris Ranger Standard Cab & 2010-11 6x6 & Crew Cab Rear Seat Dust Barriers
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
These dust barriers are constructed of 1/8″Aluminum Diamondplate and then sandblasted and Powdercoated Matte Black.
Combined with the FTDcabs front mud guards, the dust inside the cab will be kept to a minimum with these panels. They mount to the rear of the seat using the existing screws and will keep the dust from entering from between the seat base and seat back.
For 800cc Polaris Rangers only
|
|
|
|
|
|
|
|
|
|
2005-2008 Polaris Ranger - Standard Cab Front Winch Mount
|
List Price: $84.99
Our Price: $74.95
You save $10.04!
|
|
|
This American made winch plate fits Warn, Ramsey, Milemarker and other brand winches. It mounts inside the front bumper and is powder coated for superior protection. The mount will work on 2005-2008 XP700s and 500 4x4.
*Winch not included.
|
|
|
|
|
|
|
|
|
|
2005 - 2008 Polaris Ranger Standard Cab & 2005 - 2009 6x6 & Crew Cab Front Strut Pre-loader
|
List Price: $89.95
Our Price: $80.95
You save $9.00!
|
|
|
This Pre-Loader was designed to give a little lift and add stiffness to the front of the vehicle when adding extra weight such as baskets and plows or anything else that adds weight to the front of the vehicle.
Fits 2005-2008 all Rangers and 2009 Crew and 6x6
RangerWare part # WPS-140
|
|
|
|
|
|
|
|
|
|
2003-2009 Polaris Ranger Yamaha Rhino Blower Motor .
|
List Price: $96.95
Our Price: $87.25
You save $9.70!
|
|
|
Replacement Blower motor to fit all RangerWare and Rhinogear heater systems Part number is WOC-104 Blower Motor
|
|
|
|
|
|
|
|
|
|
2003-2011 Polaris Ranger Standard Cab, 6x6, Crew & Rzr 1" Wheel Spacer .
|
List Price: $99.95
Our Price: $89.95
You save $10.00!
|
|
|
Need to widen out your Ranger or Rzr? Add an extra 2 inches total width to it using a pair of these High quality 1 inch aluminum spacers by HighLifter. 2 per package.
Part # WT4/156-1
|
|
|
|
|
|
|
|
|
|
Universal UTV Quick Draw Overhead Gun Rack
|
List Price: $104.99
Our Price: $93.95
You save $11.04!
|
|
|
Here’s the perfect way to safely keep your firearms at your fingertips – and, to keep them totally protected. The Quick Draw Overhead Gun Rack holds two guns securely in the inside roof area of the UTV. The unique mounting system installs in just minutes without any drilling or bolting. Features super-soft rubber gun clips that provide easy access and secure transport.
This model fits UTV’s which have upper (roof) frames that measure 23 to 28 inches from front to back
Ranger 500
Ranger 800
Kabota RTV 500
Kawasaki Mule 610
Honda Big Red
|
|
|
|
|
|
|
|
|
|
2009 - 2011 Polaris Ranger Standard Cab & 2010-2011 6x6 Aluminum Floorboards .
|
List Price: $109.95
Our Price: $98.95
You save $11.00!
|
|
|
These floorboards will stop your existing stock floor from cracking. It will also help deflect debris from coming from below. These Ranger floorboards do not glue on like many other floorboards. They use the existing screws that are already or your Ranger. Simply unscrew, lay the floorboard down and re-install the floorboards. That's it.
|
|
|
|
|
|
|
|
|
|
Universal UTV Quick Draw Gun Rack
|
List Price: $114.95
Our Price: $99.95
You save $15.00!
|
|
|
Here's a universal mounting, two-gun rack that puts "Ole Betsy" at your fingertips as you cruise your hunting property. Mounts in a "stand alone" fashion and can be positioned for quick access and maximum use of passenger space.
The Quick-Draw holds two guns (shotgun, rifle or muzzleloader) securely and protected in a soft, cushioned cradle.
Unlike conventional clips and loops, our unique Velcro straps form and fit the holding cradles to the exact size of the stock or forearm of the gun it is holding - no more loose fits to disturb the sight and scope settings!
The Quick-Draw comes complete with all necessary hardware for quick and easy installation.
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger 2 inch Front Hitch Receiver .
|
List Price: $124.95
Our Price: $114.95
You save $10.00!
|
|
|
This front receiver mounts inside your stock front bumper. It allows you to insert a standard 2" square receiver hitch or a multi-mount winch plate on the front of your Polaris Ranger. The receiver is made from .188 inch thick American steel ad is very heavy duty. Simply bolts it inside your stock front bumper an you're ready to go. No cutting or drilling required.
Fits 2009-2010 500 and 2009-2011 800 (will not fit 2009 Crew, 6x6, 2010 400/EV or 2011 Ranger 500)
|
|
|
|
|
|
|
|
|
|
2003-2011 Polaris Ranger Standard Cab, 6x6, Crew & Rzr 1.5" Wheel Spacer .
|
List Price: $139.95
Our Price: $117.95
You save $22.00!
|
|
|
Need to widen out your Ranger or Rzr - add an extra 3 inches total width to it using a pair of these High quality 1.5 inch aluminum spacers by HighLifter 2 per package. Add Stability to your Vehicle.
Part #WT4/156-15
|
|
|
|
|
|
|
|
|
|
Off Road Front Light Kit
|
List Price: $136.95
Our Price: $123.26
You save $13.69!
|
|
|
This light kit includes two 12 volt 35 watt replaceable lights with mounting brackets and custom designed wiring harness. These lights are very bright for 35 watts due to the lens design. The lights feature a very tough Cast steel housing. The kit comes complete with switch.
This light kit is very universal and could be easily adapted to nearly any vehicle.
|
|
|
|
