|
|
|
|
|
|
Polaris Ranger RZR "Cooter Brown" Front Bumper Glide
|
List Price: $27.99
Our Price: $22.95
You save $5.04!
|
|
|
Made from 3/8 in thick high molecular weight polyethylene (UHMW) so you can protect your front bumper and glide over rocks and stumps etc. "UHMW" slides over rocks very quietly and does not hang up or dent like steel. It bolts to Pure Polaris P/N 2876520-458 Deluxe Front Brushguard, 2876400-458 Pre-Runner Brushguard, and 2877308 Front Aluminum Brushguard. It will also fit unisteer and other knock-offs.
|
|
|
|
|
|
|
|
|
|
Polaris Ranger Standard Cab, 6x6 & Crew Cab Rear View Mirror .
|
List Price: $26.95
Our Price: $24.25
You save $2.70!
|
|
|
This mirror can be installed any glass windshield. It is a Day/Night Mirror, with mounting tab and adhesive included in the kit. This mirror is double jointed. When properly applied to a Tip-Out Windshield it can be used with the windshield open.
(Can be used on any glass windshield)
RangerWare part # WPS-108
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab RangerWare Tip Out Limiter .
|
List Price: $29.95
Our Price: $26.95
You save $3.00!
|
|
|
Replacement Tip Out Limiter..This item only works with the latch mechanism shown in the photos
RangerWare Part # WPS-101TL
|
|
|
|
|
|
|
|
|
|
UTV Trailer Hitch - All Years
|
List Price: $39.95
Our Price: $36.95
You save $3.00!
|
|
|
This UTV trailer hitch is an extra long 17 inches. Big hole is for trailer ball. Small hole is for a wagon pin.
|
|
|
|
|
|
|
|
|
|
Roll Tube Mount UTV Light Bracket Set
|
List Price: $43.95
Our Price: $37.95
You save $6.00!
|
|
|
These brackets are great for mounting additional lights to your UTV by simply clamping to the side of your roll cage. They were designed with the woods rider in mind. In other words, you can mount light to your roll cage down low so that tree branches will not knock your lights off. Will fit Yamaha Rhino, RZR, Polaris Ranger and Mule.
They will fit almost all UTV's but you must specify what size diameter roll cage you have.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Ranger Standard Cab & 2009 Crew Cab &6x6 Polaris Ranger Wye Vent Kit .
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
This is the WOC-1104 Wye Vent Kit. It can be used with any application using 2" heater ducting. It comes with a "Wye" 2 360 degree swivel vents, duct hose and ties. Often used for additional defrost venting.
Part # WOC-1104
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Mud Flaps - Standard Cab and 2010 6x6 & Crew Cab Front Mud Flaps
|
List Price: $49.95
Our Price: $44.95
You save $5.00!
|
|
|
These mudflaps fit the 2009-2010 Standard Cab Rangers and 2010 Crew Cab and 6×6 Rangers only. (they will not fit 2009 Crew Cab or 6×6)
Cuts down noticeably the amount of dust from entering the forward cab area
Constructed of sturdy 1/8″Aluminum Diamondplate
Sandblasted and Powdercoated Matte Black.
Bolts to the Ranger using existing screws, barely effecting the overall width of the machine. No holes to drill and the mudflaps install in minutes. These mudflaps will also help reduce the dust coming inside the cab area.
Will not fit Ranger 400, 2009 Crew or 6X6 or 2011 500 models.
|
|
|
|
|
|
|
|
|
|
Polaris Ranger RZR Winch Mount
|
List Price: $144.99
Our Price: $49.95
You save $95.04!
|
|
|
This Polaris RZR winch mounting plate fits most ATV winches up to 3500 lbs. It includes all mounting hardware needed and is powder coated black.
Fits:
Polaris Ranger RZR, including "S" models
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger Standard Cab & 2003 - 2009 6x6 & Crew Cab Mud Flaps .
|
List Price: $57.95
Our Price: $52.15
You save $5.80!
|
|
|
This Mud Flap has a black pebble finish, is 12”x20”x1/8” with heavy steel powder coated attachment brackets. Mud Flap brackets mount to our WPS-102 Rear Bumper attaching brackets. The Mud Flap is designed for use on 2×4, 4×4, and 6×6 machines.
(Requires RangerWare WPS-102 Rear Bumper for mounting)
RangerWare part # WPS-105
|
|
|
|
|
|
|
|
|
|
2010 Polaris Ranger 400 Front Winch Mount
|
List Price: $62.95
Our Price: $52.95
You save $10.00!
|
|
|
Mounts behind stock front bumper. Made from .188 inch thick steel. Powdercoated for superior protection. It has a two hole pattern to fit most brands of winches.
3" x 4.88" and 6.625" x 3" bolt pattern for most winches.
Mounts behind stock front bumper.
|
|
|
|
|
|
|
|
|
|
Polaris Ranger RZR XP900 Winch Mounting Plate
|
List Price: $64.95
Our Price: $53.95
You save $11.00!
|
|
|
Mount up to a 4000 lb winch on your RZR XP900 with this kit. Includes everything you need but the winch. Accepts both a regular spool and a wide spool winch. The plate mounts behind the radiator and is laser cut from 3/16 inch American steel then powder coated. Accepts two winch mounting bolt patterns (6.6 inches wide x 3 inches deep and 4.875 wide).
|
|
|
|
|
|
|
|
|
|
2009-2011 Polaris Ranger Front Winch Mount
|
List Price: $64.99
Our Price: $54.95
You save $10.04!
|
|
|
This American made winch plate fits Warn, Ramsey, Milemarker and other brand winches. It mounts inside the front bumper and is powder coated for superior protection.
Fits:
2009-2011 Ranger 800
2009-2010 Ranger 500 and 700
2010 Crew and 6x6
*Winch not included.
|
|
|
|
|
|
|
|
|
|
2005 - 2008 Polaris Ranger Standard Cab & 2005- 2009 6x6 & Crew Cab Under Dash Panels .
|
List Price: $63.95
Our Price: $57.55
You save $6.40!
|
|
|
Friction fit panels install on the under side of dash board to “help” control dust and heat issues.
RangerWare part # WPS-120
|
|
|
|
|
|
|
|
|
|
Polaris Ranger RZR & RZRS Hand Operated Windshield Wiper
|
List Price: $67.95
Our Price: $58.95
You save $9.00!
|
|
|
Hand operated wiper and mounting bracket. Mounting bracket holds the wiper from falling down when not in use.
|
|
|
|
|
|
|
|
|
|
Polaris RZR and RZRS Shifter Lock-All Years
|
List Price: $64.95
Our Price: $59.45
You save $5.50!
|
|
|
Stop your RZR from being stolen with this "Anti-Theft" Shift lock. Now, you can lock your RZR into park with your own padlock of choice. Made from Stainless Steel and AISI 1040/1050 Steel and hardened by Heat Treating making it very strong. You can bolt the bracket under your shifter housing and when locked into part you can not remove the housing. This is a great way to secure your RZR outside your hotel or other areas.
Actual lock is black. Yellow shown for clarity
|
|
|
|
|
|
|
|
|
|
2010 - 2011 Polaris Ranger Standard Cab & 2010-11 6x6 & Crew Cab Rear Seat Dust Barriers
|
List Price: $79.95
Our Price: $71.95
You save $8.00!
|
|
|
These dust barriers are constructed of 1/8″Aluminum Diamondplate and then sandblasted and Powdercoated Matte Black.
Combined with the FTDcabs front mud guards, the dust inside the cab will be kept to a minimum with these panels. They mount to the rear of the seat using the existing screws and will keep the dust from entering from between the seat base and seat back.
For 800cc Polaris Rangers only
|
|
|
|
|
|
|
|
|
|
2005-2008 Polaris Ranger - Standard Cab Front Winch Mount
|
List Price: $84.99
Our Price: $74.95
You save $10.04!
|
|
|
This American made winch plate fits Warn, Ramsey, Milemarker and other brand winches. It mounts inside the front bumper and is powder coated for superior protection. The mount will work on 2005-2008 XP700s and 500 4x4.
*Winch not included.
|
|
|
|
|
|
|
|
|
|
2003 - 2008 Polaris Ranger 500CC only Wheel Well Liners .
|
List Price: $89.95
Our Price: $80.95
You save $9.00!
|
|
|
The WPS-110 are thermo molded vinyl liners which protect the battery box and gas tank from dirt, mud, and debris being thrown off your tires. They are easy to install, left and right sided. The left side can be easily removed to allow access to the battery area. This accessory helps keep your vehicle looking new, longer. Makes clean up a bunch easier. Not for use on any XP models. Recommended for 500CC only
RangerWare part # WPS-110
|
|
|
|
|
|
|
|
|
|
2005 - 2008 Polaris Ranger Standard Cab & 2005 - 2009 6x6 & Crew Cab Front Strut Pre-loader
|
List Price: $89.95
Our Price: $80.95
You save $9.00!
|
|
|
This Pre-Loader was designed to give a little lift and add stiffness to the front of the vehicle when adding extra weight such as baskets and plows or anything else that adds weight to the front of the vehicle.
Fits 2005-2008 all Rangers and 2009 Crew and 6x6
RangerWare part # WPS-140
|
|
|
|
|
|
|
|
|
|
Polaris Ranger RZR 2 Inch Receiver Hitch
|
List Price: $94.95
Our Price: $84.95
You save $10.00!
|
|
|
This is a very heavy duty hitch. It is made of 1/4 inch thick steel and bolts to the frame in addition to the stock mounting holes. It mounts with eight bolts and functions as a frame support. The mount is also 1 1/2 inches shorter than the factory hitch allowing for a greater departure angle.
On the RZR-S it mounts behind the rear cage on the back.
|
|
|
|
